YNZSY-LTY Series Deodor and Decolor Environmental Waste Tire Oil Recycling Machine
YNZSY-LTY Series Deodor and Decolor Environmental Waste Tire Oil Recycling Machine runs under low temperature from the beginning to the end. It can effectively remove particles, colloidal matter, acid and odour from tire oil by acid-treatment and filtration. Finally, you can get oil with clean and transparent color and a qualified smell to improve its economic value.
Features of Used Tire Oil Recycling Machine:
- It combines physical and chemical methods to remove the tiny impurities and colloidal substance in the tire oil.
- Use special sand filtration technology to remove impurities and odour quickly, to restore the color of used tire oil and to improve quality.
- The interlocked electrical control system is safe, reliable and easy to operate.
- With an automatic filling system which can fill the tire oil into tank automatically to save human power.
- The obvious and direct effect from low treatment cost.
- YUNENG is a powerful manufacturer specializing in oil filter equipment, you can contact us at any time.
- Feeding, it takes 1-2 hours, tires below 1.4 meters can be directly fed into the tires, large tires need to be cut and then fed.
- Heating takes about 10 hours Generally, oil and gas will be produced when heated to 2 hours.
- Cooling, oil and gas will be condensed into oil through the cooling system.
- Exhaust gas recovery and utilization, in addition to oil and gas, there will be some flammable in the process of heating and cracking. Non-condensable gas generation, we call it “exhaust gas”, this gas can be directly recovered for heating the cracking reactor to save fuel.
- Carbon black and steel wire slag, etc., the end of the cracking process, the oil and gas is finished, the reaction needs to be the residual material in the kettle is discharged and a new cracking process is carried out, which mainly includes the steel wire for producing the carbon black of the tire.
|Treatment capacity||L/H||250||500||1000||2000||Contact us|
|Loading capacity||Liters||250||500||1000||2000||Contact us|
|Working pressure||MPa||≤0.4||≤0.4||≤0.4||≤0.4||Contact us|
|Vacuum degree||MPa||-0.06～-0.095||-0.06～-0.095||-0.06～-0.095||-0.06～-0.095||Contact us|
The machine size, weight will change slightly due to different configurations