1000m³/h Transformer Vacuum Drying Machine

The YUNENG1000m³/h transformer vacuum drying machine has a fast start-up speed and fast air extraction.
It is especially suitable for the vacuumization of transformers.
It can also be used for vacuumization in vacuum metallurgy, pharmaceutical, paint, welding, electronics, and other industries.
It can also be used as a backing pump for large vacuum systems.

Share to

Features of Transformer Vacuum Drying Machine:

Efficient, reliable, and low noise.
Ultimate vacuum height, high pumping speed, high water vapor allowable pressure.
Easy to install, use, maintain, and low noise.
The large fuel tank design and the good characteristics of the vacuum pump oil ensure that the pump runs for a long time without failure.
Built-in anti-return oil valve, built-in cone dust-trap net, special exhaust design to ensure no oil injection and less maintenance work.

Parameter		Unit	ZJ-70	ZJ-150	ZJ-300	ZJ-600	ZJ-1200
Power Supply			50Hz 380V 3-Phase 4-Wire (or as requested)
Power Supply		KW	4	6.5	7	11	18.5
Limit Vacuity		Pa	≤3
Pumping Speed		L/S	70	150	300	600	1200
Pumping Level			2
Connection Diameter		mm	50			80
Size	Length	mm	1200	1300	1400	1600	1750
	Width	mm	950	100	1100	1200	1300
	Height	mm	1500	1600	1700	1900	2100
Weight		Kg	300	400	500	1250	1560

The machine size and weight will change slightly due to different configurations

This set fast in start-up and pumping and thus is especially suitable for vacuolization of transformers.
It can also be used for vacuolization in vacuum metallurgy, welding, chemistry, pharmacy, coating, and electronic industries.
It can be used as a fore-line pump for large vacuum systems. Fast in start-up and pumping and thus is especially suitable for vacuolization of transformers. Besides, it can also be used for vacuolization in vacuum metallurgy, welding, chemistry, pharmacy, coating, and electronic industries. Also, be used as a fore line pump for large vacuum systems.